DJI Agras T25P Specifications
Source: DJI official specifications. Compiled by ASI Computer, DJI Authorized Dealer.
Aircraft
| Weight | 26 kg (spraying without battery) | 33 kg (spraying with battery) |
| Max Takeoff Weight | Max takeoff weight for spraying: 53 kg | Max takeoff weight for spreading: 60 kg |
| Max Diagonal Wheelbase | 1970 mm |
| Dimensions | Spraying: | 2650×2700×820 mm (arms and propellers unfolded) | 1520×1580×820 mm (arms unfolded and propellers folded) | 1120×700×850 mm (arms and propellers folded) | Spreading: | 2650×2700×850 mm (arms and propellers unfolded) | 1520×1580×850 mm(arms unfolded and propellers folded) | 1120×700×850 mm(arms and propellers folded) |
| Hovering Accuracy Range (with strong GNSS signal) | RTK enabled: | Horizontal: ±10 cm, Vertical: ±10 cm | RTK disabled: | Horizontal: ±60 cm, Vertical: ±30 cm |
| Max Configurable Flight Radius | 2000 m |
| Operating Temperature | 0° to 40° C |
| Max Wind Resistance | Level 3 wind (<6 m/s) |
C8000 Intelligent Power Supply
| Dimensions | 300×280×230 mm |
| Weight | 11.5 kg |
| Input | 100-240 Vac |
| Output | Output Voltage: 59.92VOutput Current: 100A max |
| Charging Time | Fully charges a battery in 9 to 12 minutes (DB800 Intelligent Flight Battery) |
| Protection Functions | Over-voltage, over-charge, under-voltage and over-temperature protection. |
| Charging Safety | AC wire protection, power wire protection, and charge connector protection |
D6000i Multifunctional Inverter Generator
| Battery charging time | To fully charge one battery (DB800 battery) takes 9-12 mins |
| Fuel tank capacity | 20 L |
| Starting Method | Starting the Generator via the One-Button Start Switch |
| Max Power of Engine | 6 kW |
| Fuel type | Unleaded gasoline with RON ≥91 (AKI ≥87) and alcohol content less than 10% | (*Brazil: unleaded gasoline with RON ≥ 91 and alcohol content of 27%) |
| Reference fuel consumption | 600 ml/kWh |
| Engine Oil Capacity | 0.8 L |
| Engine Oil Model | SJ10W-40 |
DB800 Intelligent Flight Battery
| Weight | Approx. 6.6 kg |
| Capacity | 15500 mAh |
| Nominal Voltage | 52.22 V |
Propulsion System - Motors
| Stator Size | 100×28 mm |
| KV | 59 RPM/V |
Propulsion System - Propellers
| Material | Nylon carbon fiber |
| Dimensions | 50 in |
| Quantity | 4 |
Remote Controller
| Model | TKPL 2 |
| Screen | 7-inch LCD touchscreen; resolution: 1920×1200; brightness: 1400 cd/m² |
| Storage Temperature Range | Less than one month: -30° to 45° C (-22° to 113° F) | One to three months: -30° to 35° C (-22° to 95° F) | Three months to one year: -30° to 30° C (-22° to 86° F) |
| Charging Temperature | 5° to 40° C (41° to 104° F) |
| Internal Battery Runtime | 3.8 hours |
| External Battery Runtime | 3.2 hours |
| Charging Type | It is recommended to use a locally certified USB-C charger at a maximum rated power of 65 W and maximum voltage of 20 V such as the DJI 65W Portable Charger. |
| Charging Time | 2 hours for internal battery or internal and external battery (when remote controller is powered off and using a standard DJI charger) |
Safety System 3.0
| Millimeter-Wave Radar EIRP | <20 dBm (NCC/MIC/KC/CE/FCC) |
| Operating Temperature | 0° to 40° C; |
| Operating Environment | Adequate light and discernible surroundings |
| Operating Frequency | 24.05-24.25 GHz (NCC/FCC/MIC/KC/CE) |
| Field of View (FOV) | Front phased array digital radar: Horizontal 360°, Vertical ±45°, Upper ±45° (cone) | Rear phased array digital radar: Vertical 360°, Horizontal ±45° | Tri-camera vision system: Horizontal 90°, Vertical 180° |
| Range | ≤ 60 m |
| Effective safe obstacle avoidance speed | ≤ 10 m/s |
| Effective Obstacle Avoidance Height | ≥ 1.5 m |
| Safe Distance | 2.5m (Distance between the drone and obstacle after braking and stable hovering) |
Spraying system - Delivery Pumps
| Type | Impeller Pump (Magnetic Drive) |
| Quantity | 2 |
| Max Flow Rate | 16 L/min (2 nozzles) | 24 L/min (4 nozzles) |
Spraying System - Spray Tank
| Material | Plastic (HDPE) |
| Volume | 20 L |
| Operating Payload | 20 kg |
Spraying System - Sprinklers
| Model | LX07550SX |
| Quantity | Standard Configuration 2 |
| Nozzle Distance | 1420 mm (Rear Nozzles) |
| Droplet Size | 50-500 μm |
| Effective Spray Width | 4-7 m (at a height of 3 m above the crops) |
Spreading System 4.0
| Compatible Material Diameter | 0.5-5 mm dry granules |
| Spreading Tank Volume | 30 L |
| Spreader structure type | Centrifugal Disc |
| Discharge Structure Type | Feeder Feeding |
| Max Discharge Rate | 190 kg/min (compound fertilizer) |
| Max load inside the spreading operation box | 25 kg |
| Effective spreading width | 3-8 m |
Note: Specifications are sourced from DJI official product pages. Values may vary based on testing conditions and firmware versions.
